Thermometers, Thermostats, and Timers

The laser unit adds a much requested red sighting laser, and an expanded temperature range to 662F (or 350C). This unit has an adjustable emissivity setting for precise calibration, and perhaps best of all, a tight infrared "cone" distance to spot ratio (D:S) of 6:1. That means at a distance of 6 inches, you are reading an area just 1 inch in diameter. At a distance of 2 feet, an area of just 4 inches, as compared to our wider D:S ratio of 1:1 on the basic unit.

Includes a wrist strap and two batteries.

More

Same features as original DBS1000, but comes with a grounded plug for use with metal rack systems. (see original DBS-1000 proportional thermostat for features)

More

Special includes the DBS1000 Helix Thermostat, the Appliance Timer Adapter Cord and the $25 Infrared Temperature Gun

More

The adapter cord is a trigger device that is used to actuate the night temp drop of the DBS1000 Thermostat. This works with an electro-mechanical appliance timer that is plugged into a 110v AC outlet.

More

Includes the Helix DBS-1000 Proportional Thermostat and the Appliance Timer Adapter Cord

More

This state of the art controller will maintain any preselected temperature between 60 and 105 degrees, and comes with a probe to measure the temperature in your terrarium and adjust according to what you set it at. There are outlets for 3 different heat sources, and the thermostat holds up to 1000 watts.

More

Proper terrarium temperature is recommended for a reptile or amphibian’s healthy, active life. Add a Temperature Controller to maintain a pet’s terrarium at any preset temperature between 60° and 105°F. Simply place the temperature probe in a terrarium using the included suction cup, then connect any type of incandescent heat source (heating device is not included). An added safety feature automatically shuts off the heating system if terrarium temperature exceeds 110°F due to heater malfunction or excessive sunlight. 500 watt system with a single input

More

Simple appliance timer allows you to set your lights or heaters to switch on and off at any given time in half hour increments. Convenient override switch included. For indoor use.

Product Specs: * 15 Amp * 500 Watts Tungsten * 1/3 H.P. 125 V.A.C. * 60 Hz

More

This grounded, digital timer can turn on or off any given electronic device to your specifications. Complete with 24 hour and 7 day settings, this is a very versatile unit. You can set it for as little as one minute, and can have various settings for different days of the week. Great for transitional photoperiods during breeding season.

More

Replace the tangle of wires and timers behind a reptile terrarium with a single safe power strip featuring built in control. Spin the handy dial to set on/off times for four plug-in devices, while simultaneously powering four devices that run constantly. Ideal for cycling lights and heaters to replicate the natural day/night sequence that promotes reptile health. The precise analog control is adjustable to 15-minute intervals. This ruggedly built, UL listed device is backed by a 12-month warranty.

More

Replace the tangle of wires and timers behind a reptile terrarium with a single safe power strip featuring built in control. The dual purpose device features an alternating day and night timer while providing an independent day-shift timer for separate control. Ideal for cycling lights and heaters to replicate the natural day/night sequence that promotes reptile health. The precise analog control is adjustable to 15-minute intervals. This ruggedly built, UL listed device is backed by a 12-month warranty.

• One center manages lights, filters...everything!
• Constant power or day/night cycling, both in one device
• Reliable analog design is easy to program

More

Temperature range from - 10 degrees to 140 degrees Fahrenheit! Also comes with a 39 inch probe for pinpoint accuracy.

More

This gauge-style thermometers are easy to read and use. Velcro on the back means that it can be moved around within the enclosure to monitor multiple areas with a single thermometer. Great for measuring the temperatures of basking spots.

More

The HygroTherm™ is a Thermostat and Humidistat in one! It controls up to 1000 watts of combined temperature and humidity control devices. It has a 2-in-1 Remote Temperature/Humidity Sensor with 5 foot cable. It’s great for use with Zoo Med’s Repti Fogger™ Terrarium Humidifier or Habba Mist® Automatic Misting Machine. The Hygro Therm™ has a nighttime temperature drop feature controlled by a photocell, built in memory which stores settings in case of power failure and an alarm that can be set to flash when the temperature or humidity reaches extreme high or low levels. Additional Information:

• Controls temperature by turning on/off heating devices in “HEAT" mode or by turning on/off cooling devices (e.g., fan) n “COOL" mode.
• Temperature control range is 50°F to 122°F (10°C to 50°C)
• Humidity control range: 15% to 95% RH (Relative Humidity)

More

Cold-blooded reptiles stay healthier and more active with the accurate monitoring of a Digital Thermometer for Terrariums. Press a button to display temperatures from -10°F to 140°F (-23°C to 60°C) in either Fahrenheit or Celsius, graduated in 0.1° increments that reveal temperature trends long before they can harm pets. Equal accuracy is achieved in both aquatic and terrestrial environments, simply by positioning a temperature probe (attached to the thermometer by a 39" lead wire) in the spot to be monitored. Keep the lead out of sight by securing it with the included suction cups. Choose constant temperature monitoring, or turn the unit off to save battery power (a battery is included.)

More

Waterproof: Completely Submersible! Digital readout faces forward in the tank. Suction cups to the glass. Spare battery included. Perfect for both fresh and saltwater tanks!

More

The Exo Terra Digital Hygrometer is equipped with a remote sensor for accurate measurement and durability. This precision instrument comes with a programmable minimum and maximum memory setting which can be controlled with one single button. The sensor is held in place with a suction cup, while the instrument can be mounted in three ways - with Velcro® (included), with a screw or it simply slides into place on a new Exo Terra Compact Top or Dual Top.

* Accurate relative air-humidity indication
* Unique remote sensor
* Minimum / Maximum temperature memory
* Fits the Exo Terra Compact Top and Dual Top Canopies

More

Can hold up to 2 20 watt bulbs.

The Exo Terra Light Cycle Unit Electronic Dimming Terrarium Lamp Controller, is an electronic ballast, a timer and a dusk - dawn simulator in one. The timer can be set for three lighting periods: 10, 12 or 14 hours. When a daytime cycle starts it will take about 30 minutes to bring the light output of the bulb to 100%, simulating a natural dawn period. At the end of each daytime cycle it will take again about 30 minutes to go from 100% light output to 0%, simulating a natural dusk period. This is less stressful for the animals and even stimulates breeding behavior in many species of reptiles. It gives the animals time to retreat into their burrows or hiding places. The Exo Terra Light Cycle Unit provides a flexible lighting solution for your terrarium. Just mount the electronic ballast housing near the terrarium, and connect the fluorescent bulbs to the water-resistant end caps. The long, flexible end-cap leads allow you to position the fluorescent bulbs very close to the animals, necessary when UVB bulbs are used (ie: Repti Glo 5.0 and 10.0). The long end-cap leads also provide the versatility to mount bulbs over any type of terrarium, regardless of size.

More

Holds 2 40 watt bulbs.

The Exo Terra Light Cycle Unit Electronic Dimming Terrarium Lamp Controller, is an electronic ballast, a timer and a dusk - dawn simulator in one. The timer can be set for three lighting periods: 10, 12 or 14 hours. When a daytime cycle starts it will take about 30 minutes to bring the light output of the bulb to 100%, simulating a natural dawn period. At the end of each daytime cycle it will take again about 30 minutes to go from 100% light output to 0%, simulating a natural dusk period. This is less stressful for the animals and even stimulates breeding behaviour in many species of reptiles. It gives the animals time to retreat into their burrows or hiding places. The Exo Terra Light Cycle Unit provides a flexible lighting solution for your terrarium. Just mount the electronic ballast housing near the terrarium, and connect the fluorescent bulbs to the water-resistant end caps. The long, flexible end-cap leads allow you to position the fluorescent bulbs very close to the animals, necessary when UVB bulbs are used (ie: Repti Glo 5.0 and 10.0). The long end-cap leads also provide the versatility to mount bulbs over any type of terrarium, regardless of size.

Includes adapters to accommodate T8 or T10 bulbs.

More

More

Programmable timer and power strip in one. Includes 8 grounded outlets. Easy to program analog design. Provides for a natural day/night cycle for your fish

More